VDO Tachograph Pairing
Pairing the VDO tachograph via Bluetooth enables direct data download from the driver card, through the tachograph, into the app.
Prerequisites
- ✓The driver card must be inserted in the tachograph
- ✓The tachograph must be Bluetooth-capable (G2V2 Smart generation)
- ✓The phone’s Bluetooth must be turned on
- ✓The TachoData or TachoAI app must be open on the phone
Important!
The pairing always applies to the same arrangement of the same driver cards — when driving solo, only to your own card. If a different card is inserted in the tachograph, or if your card is moved to a different slot, the previous pairing must be deleted on both the tachograph and the phone.
The TachoData and TachoAI app automatically detect nearby tachographs that can be paired, as well as those already paired.
Pairing steps on the tachograph
- Press the OK button on the tachograph
- Press the ▼ (down) button 2 times
- Select the "Driver 1" menu
- Press the OK button
- Press the ▲ (up) button 2 times
- Select the "Bluetooth" menu item
- Press the OK button
- Select the "Pair" option
- Select your phone from the list
- Confirm the pairing code on both devices
Warning!
The pairing is linked to the tachograph AND all driver cards inserted in it. If the cards change (e.g. another driver uses the tachograph), the pairing must be deleted and re-established!
Removing the pairing
If the driver cards have changed or the pairing is not working properly, you can remove it as follows:
1. Remove from the phone
- Open the phone's Settings menu
- Go to the Bluetooth section
- Find the tachograph name among paired devices
- Tap "Forget device"
2. Remove from the tachograph
The pairing must also be removed on the tachograph. Enter the Bluetooth menu following the steps above, and select the delete option next to the phone name.
Tip
The pairing must be removed on both sides (phone AND tachograph), otherwise re-pairing will not succeed.